Comtrol AT Commands for SmartACFL Manuale Utente Scaricare il pdf (Pagina 47)

Command Reference Manual

100722A

Conexant

3-27

3.2.3.6 O - Return to On-Line Data Mode

This command determines how the modem will enter the on-line data mode. If in the on-line command mode, the modem

enters the on-line data mode with or without a retrain. If in the off-line command mode (no connection), the modem reports

ERROR.

Syntax

O<value>

Defined Values

<value> Decimal number corresponding to the selected option.

0 Enters on-line data mode without a retrain. Handling is determined by the Call

Establishment task. Generally, if a connection exists, this command connects the

DTE back to the remote modem after an escape (+++).

1 Enters on-line data mode with a retrain before returning to on-line data mode.

2 Fast retrain without speed change (used for diagnostic purpose only).

3 Renegotiate rate without speed change (used for diagnostic purpose only.

4 Renegotiate rate down one speed (used for diagnostic purpose only).

5 Renegotiate rate up one speed (used for diagnostic purpose only).

Result Codes

OK <value> = 0 to 5 and a connection exists.

ERROR Otherwise or if not connected.

3.2.3.7 L - Speaker Volume

This command sets the speaker volume control. The parameter value, if valid, is written to S22 bits 0 and 1.

Syntax

L<value>

Defined Values

<value> Decimal number corresponding to the selected option.

0 Low volume.

1 Low volume. (Default.)

2 Medium volume.

3 High volume.

Result Codes

OK <value> = 0 to 3.

ERROR Otherwise.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 171 172

Nessun commento

Comtrol AT Commands for SmartACFL Manuale Utente Pagina 47