Comtrol RocketModem Driver Installation for Novell NetWare Manuale Utente Scaricare il pdf (Pagina 18)

NIAS/MPR Installation and Configuration for NetWare 5.x 18

NIAS/MPR Installation and Configuration for NetWare 5.x

This discussion assumes the following:

• You have installed the RocketPort or RocketModem board(s) in the server

• The board(s) have passed the hardware diagnostic

• You have installed the driver (AIORCKT.NLM)

• You have determined which I/O addresses are used by the boards you have installed

• You have not loaded the driver manually, using the load aiorckt command

The inetcfg module provides the proper mechanisms for loading and configuring the driver. If necessary, down

and restart the server to make sure that the driver is not loaded.

The following instructions assume a single RocketPort or RocketModem board, but the process is similar

when multiple boards are installed. Follow these steps:

1. At the server console, enter load NIASCFG.

2. Select Configure NIAS.

3. Select Protocols and Routing.The Internetworking Configuration menu displays:

4. Select Boards. The list of configured boards displays:

5. Press the Insert key to add a new board.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 28 29

Nessun commento

Comtrol RocketModem Driver Installation for Novell NetWare Manuale Utente Pagina 18